Hitachi NR1890DBCL/JP Cordless First Fix Framing Nailer, 18 V, Multi-Colour, 2 x 18V 5.0Ah Li-ion Batteries

Product Information

Use the supplied aerosol to blast out any ingress and agitate with the supplied brush. Give it a good wipe out with the cloth too.` Step 4: the chamber within the nail gun must be kept clean and free from foreign bodies. Detrius within the chamber can stop the pin from firing and damage the tool. The exhaust valve (rubber shaped band/o-ring around cylinder) damaged, missing, or not fitting snugly- replace or repair to fit.

There is a rubber-shaped ring around the cylinder known as an exhaust valve. If it is somehow worn, damaged, or missing, remove and replace it as soon as possible. If the battery is attached to the nailer for 12 hours or more, the battery's output will be automatically shut off due to the built in Auto Power OFF feature for the purpose of reducing battery consumption. In this event, the tool will not operate when the trigger is pulled, but this is not a malfunction. We hope that our comprehensive Hitachi nail gun troubleshooting guide will help your nailer be up and running again. If your Hitachi roofing nailer thrusts the nails too profoundly onto the surface, you may follow the instruction below.Besides, keeping your nail gun properly lubricated will keep most of the basic problems at bay- only use the hitachi-recommended lubricants for this.

This battery is for use only with this version of the NR90. Use with other tools may cause the tool not to operate correctly.Weighing just 3.2kg and being a cordless power tool it can be manoeuvred easily and used in awkward spaces. The ergonomic grip provides user comfort and reduces fatigue over prolonged use. This nailer comes with two 7.2V 1.5Ah batteries, a charger, safety glasses and a carry case for storage and transportation.

Dust, debris, and other materials may damage or clog the nail gun. To prevent damaging or lodging the nail gun, clean every part regularly. After every use, wipe down the tool with a clean rag. Furthermore, if you use this tool daily, remove the air filter and clean it properly once a week.If you use your tool daily, lubricate it before every use. Oil will coat and protect every component. While using it irregularly, the oil will pop out through the exhaust, which causes the O-ring to become dry. On the other hand, if the operator lubes the tool only at the time of use, it enhances friction and lessens working capacity. Conclusion If you do not adjust the nail depth accordingly, it can cause the nails to get driven either too deeply or too mildly. So, pay attention to the depth of drive adjustment. aawp box=”B000H399PC” template=”vertical”] Frequently Asked Question How do you maintain a nail gun?

I will discuss the Hitachi roofing nailer first, as it is probably their most beloved listing to date. Nailer won’t Drive Any Nail We will look at the most common Hitachi nailer problems including typical hitachi roofing nailer problems plus their basic fixes.Proper power tool maintenance is essential to making sure you tools will run all day, every day. This includes cleaning our tools to keep them free from debris and other ingress that can seriously hamper their performance and shorten their lifespan. HiKOKI (Hitachi) Gas Nail Gun NR90GC2 First Fix 90mm Framing Nailer Including 2x 1.5Ah Li-Ion Batteries & Charger in Carry Case Almost all of the tips we have highlighted for the other Hitachi nailer models problems will work here as well. Excessive air pressure might be pushing the nails too deep. Reduce the air pressure from your compressor to drive nails more accurately. Step 5: once you’ve finished cleaning the chamber, use the supplied lubricant and apply a small amount around the chamber and the seals.